3com 3C17716 Manual de usuario descargar pdf

Introducing the XRN Interconnect Module Kit

With an XRN Interconnect Module Kit (3C17715) you can

interconnect two Switch units.

This kit contains:

 Two XRN Interconnect Modules (3C17716)

 One standard XRN Interconnect Cable (3C17721)

The Switches that support this module are:

 SuperStack

3 Switch 4900

 SuperStack 3 Switch 4900 SX

 SuperStack 3 Switch 4924

 SuperStack 3 Switch 4950

 3Com

Switch 4060

 3Com Switch 4050

The Interconnect Module requires management software

version 3.0 or later to be installed on the Switch. For

instructions on upgrading the management software, refer

to the documentation supplied with your Switch.

You can gather information about the status of the

Module and its packet activity using the Expansion Module

LEDs on the front of the Switch and the LEDs on the front

panel of the Module. For explanations on how the LEDs

work, see the “LED Function Tables” on page 3.

The Interconnect Cable

The Interconnect Cable is used to interconnect two Switch

units, both fitted with Interconnect Modules.

The standard Interconnect Cable is 1 m (3.28 ft) long and

color-coded with a yellow marker at one end and a blue

marker at the other end.

The end of the Interconnect Cable that you connect to the

Switch determines the identity of the Switch. The Switch

that has the blue end of the cable connected to it will be

Unit 1. The Switch that has the yellow end of the cable

connected to it will be Unit 2.

The terms Unit 1 and Unit 2 are used simply to identify

the Switch units for management purposes only.

Figure 1 The Interconnect Cable

INTRODUCTION

Blue Marker / Unit 1 Yellow Marker / Unit 2

XRN Interconnect Module (3C17716)

XRN Interconnect Module Kit (3C17715)

User Guide

DUA1771-5AAA02

S/N: XXXX/7XXXXXXXXX

3C17716 XRN Interconnect M

odule

3C17716 XRN Interconnect Module

Console

(max) 19200,8,1,N

Console

(max) 19200,8,1,N

Unit 1

Unit 2

Activity

Status

1 2 3 4 5 6

Indice de contenidos

Pagina 1 - INTRODUCTION

Introducing the XRN Interconnect Module KitWith an XRN Interconnect Module Kit (3C17715) you can interconnect two Switch units. This kit contains: Tw

Pagina 2 - Handling the Module

WARNING: Installation and removal of the Module must be carried out by qualified personnel only. Before installing the Module into a unit, you must fi

Pagina 3 - MODULE PORT RESTRICTIONS

Interconnecting Two SwitchesTo interconnect two Switches, you will need the XRN Interconnect Module Kit (part number 3C17715). This kit contains: Two

Pagina 4 - TECHNICAL SUPPORT

.If you suspect a problem, carry out these steps before contacting your supplier: Check that the Interconnect Module is correctly installed in the Sw

Pagina 5 - REGULATORY NOTICES

.FCC StatementThis equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC rules. T

Pagina 6 - LEGAL NOTICES

Modelos relacionados 3C17715

Comentarios a estos manuales

Sin comentarios

3com 3C17716 Manual de usuario

Busca en linea o descarga Manual de usuario para Hardware 3com 3C17716. 3Com 3C17716 User Manual Manual de usuario

Indice de contenidos

Modelos relacionados 3C17715

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware 3com 3C17716