3com 1000BASE Manual de usuario descargar pdf

The SuperStack II Switch 1000BASE-T Module provides a

Gigabit Ethernet module for the SuperStack II Switch

1100 (12 and 24 port), SuperStack II Switch 3300 (12

and 24 port), and SuperStack II Switch 3300 FX.

The module requires management software version 2.42

or later to be installed on the Switch. For instructions on

upgrading management software, refer to the

documentation supplied with your Switch.

The module conforms to the full duplex implementation

of the Gigabit Ethernet standard IEEE 802.3ab. The

module supports a 100 m cable segment, using

Category 5 copper cabling and RJ-45 connectors, as

defined in the ANSI/TIA/EIA-568-A Commercial Building

Telecommunications Cabling Standard, and in the

1000BASE-T standard.

A white paper which describes 1000BASE-T technology

and cabling requirements in more detail is available from

the 3Com

Web site.

LEDs

You can gather information about the status of the

module and its packet activity using LEDs on the front of

the Switch and on the module itself.

NTRODUCTION

LED Color Indicates

Expansion Module Port Status LEDs

(located on the front of the Switch):

Packet Yellow Packets are being transmitted/received on

the module port.

Status Yellow A valid module is installed.

Yellow flashing An unrecognized or faulty module is

installed.

Off No module is installed.

Module Status LEDs

(located on the module at the rear of the Switch):

Packet Yellow Packets are being transmitted/received on

the module port.

Status Green Link present and port enabled.

Green flashing Link present but port disabled.

Off Link failed or disconnected.

SuperStack

II Switch 1000BASE-T Module

(3C16978)

User Guide

3C16978 SuperStack II Switch 1000BASE-T Module

DUA1697-8AAA01

1 2 3 4 5 6

Indice de contenidos

Pagina 1 - NTRODUCTION

The SuperStack II Switch 1000BASE-T Module provides a Gigabit Ethernet module for the SuperStack II Switch 1100 (12 and 24 port), SuperStack II Switch

Pagina 2 - NSTALLATION

WARNING: Installation and removal of the module must be carried out by qualified personnel only. Before installing the module into a unit, you must fi

Pagina 3

The module requires management software version 2.42 or later to be installed on the Switch. For instructions on upgrading management software, refer

Pagina 4 - TATEMENTS

TECHNICAL SPECIFICATIONS4FCC StatementThis equipment has been tested with a class A computing device and has been found to comply with part 15 of FCC

Pagina 5

HARDWARE: 3Com warrants that this hardware product will be free from defects in workmanship and materials, under normal use and service, for the follo

Pagina 6 - NVIRONMENTAL

Comentarios a estos manuales

Sin comentarios

3com 1000BASE Manual de usuario

Busca en linea o descarga Manual de usuario para Accesorios De Computador 3com 1000BASE. 3Com 1000BASE User Manual Manual de usuario

Indice de contenidos

Comentarios a estos manuales

Relacionado con productos y manuales para Accesorios De Computador 3com 1000BASE